Light Duty Lathe Machine
Light Duty Lathe Machine :-
| Particulars |
| LD-1* | LD-2 | LD-3 | LD-4 |
| Bed Length | mm⁄feet | 1065⁄3.5 | 1375⁄4.5 | 1600⁄5.25 | 1825⁄6 |
| Admit Between centre | mm | 375 | 685 | 910 | 1135 |
| Bed width | mm⁄Inch | 238⁄9.5 | 238⁄9.5 | 238⁄9.5 | 238⁄9.5 |
| Height of center | mm⁄Inch | 165⁄6.5 | 165⁄6.5 | 165⁄6.5 | 165⁄6.5 |
| Swing over bed | mm | 320 | 320 | 320 | 320 |
| Swing over cross slide | mm | 180 | 180 | 180 | 180 |
| Swing over gap | mm | 580 | 580 | 580 | 580 |
| Spindle Bore | mm⁄Inch | 38.1⁄1.5 | 38.1⁄1.5 | 38.1⁄1.5 | 38.1⁄1.5 |
| Spindle motor power | HP⁄kw | 1⁄0.75 | 1⁄0.75 | 1⁄0.75 | 1⁄0.75 |
| *Only available in gap less model | |||||
Standard Feature
- Change Gear Set (Inch & mm), Dead centre (2 nos.),
- Centre Adaptor, Chuck flange, Tool post key, Motor Pulley
Options
- Electric motor, R/F Switch & V-Belt
- True chuck & Dog chuck
- Coolant pump, Tank and Assembly
- Quick change Tool post / Rear Tool post
- Taper Turning Attachment
- Steady Rest
- Follow Rest
- Face plate
- Norton Gear Box (Single screw/Double screw)